The Bambu Lab X2D is the second-generation printer in the acclaimed X Series, now optimized for advanced dual-material workflows. Featuring an innovative dual-nozzle system, it combines a Direct Drive head for model materials with a Bowden-fed auxiliary head for support structures. This makes the X2D the ultimate tool for creating complex engineering components requiring specialized supports for a flawless finish on a build volume of up to 256 x 256 x 260 mm.
Highlights
Price range: 53.900 ден through 69.000 ден
Достапен веднаш
Бесплатно
Курир ќе достави до наведената адреса
1 Ден
јави се за цена
Повеќе детали
Методи на плаќање:
Multi-material made simple.
Smooth surfaces at full speed.
Crisp details.
Stronger parts.
Lasting precision
Your built-in backup.
Designed for your home.
The main nozzle prints the part. The auxiliary nozzle handles the support¹. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste².
Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
A lighter toolhead means less inertia and vibration. Even at full speed, surfaces stay flawless – all the way to the top.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
X2D Cooling
Typical Cooling
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber – hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn’t the point – the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
X2D Heating
Typical Heating
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn’t. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there’s minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time – so edges print crisp, no matter how fast.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for debris and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time – pausing the job before it wastes hours of time and filament.
31 sensors span the entire system – monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
Filament Path Monitoring ｜ Thermal Control
The X2D is UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic. Confirmed for low particle and VOC emissions – so you can print in your personal space with peace of mind.
Swap nozzles in seconds. No tools, no hassle. Easy for first-time users.
Active Motor Noise Canceling and a noise-optimized air duct keep X2D below 50 dB under typical conditions. Quiet enough for overnight printing⁷.
Brighter chamber lighting makes Live View and time-lapse clearer than ever, so you can check on prints from anywhere.
X2D’s dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing, maintaining smooth and consistent motion throughout. Built for years of dependable use.
X2D prints beautifully the day it arrives. And it gets better with every update. Major firmware updates land roughly every three months⁸ – new features, better performance, all pushed straight to your machine.
Бренд| Брендови |
Bambu Lab |
|---|
Технологија| Технологија |
FDM |
|---|
Волумен на принт| Принт волумен |
256 x 256 x 260 mm3 |
|---|
Комора| Затворен |
Да |
|---|
Млазница| Темп. на млазницата |
300 ℃ |
|---|
Кревет| Темп. на кревет |
110 ℃ |
|---|
Брзина| Брзина на принт |
600 mm/s |
|---|
Екструдер| Extruder Type |
Direct drive |
|---|
Камера| Камера |
Да |
|---|
No account yet?
Create an Account
